mg_logo.gif (2161 bytes) Home You have: 0  item(s)
in your | Subtotal: $0.00
Checkout | Empty
mg_right_ban.gif (1211 bytes)

mg_topgraf.gif (2070 bytes)
Grommets Home
Stimpson Grommet Machine
Stimpson 479 Foot PowerGrommet Machine
ClipsShop BGTEP-XL Grommet Machine
ClipsShop CSTEP-2 Grommet Machine
ClipsShop CSTON-1 Grommet Machine
Grommet Hand Pliers
ClipsShop CSPIC-2 Foot Press Grommet Machine
PMS060 Pneumatic Plastic Grommet Machine

Grommet Dies

Grommet Sizes
ClipsShop Grommets
Stimpson Grommets
Fasnap Grommets
Micron Grommets
Plastic Grommets

Order Tracking
Grommeting Tutorial
Testimonials
Grommet Clearance
Cart
Catalog
FAQ
Policies
Contact Us
mg_left_bot_nav.gif (395 bytes)


Free Shipping
Fast Turn Around
Brass & Nickel
Grommets
12.gif (44 bytes)

Page 1: Hand Press Machine Tutorial
Page 2: CSHAP-1 Hand Pliers Tutorial


 


(Click on image for movie demonstration)

Step 1: Install Dies
When your order arrives, your machine may have the die pre-installed or it will be packaged separately in the box. If yours is packaged separately you will need to install the die using these simple steps. One part of the die will have a screw top, that part screws in to the top portion of the machine. The other piece of the die will have a large head that is in the shape of a bowl and a smaller smooth part on the bottom, this piece will slide into the bottom portion of the machine. To tighten bottom die piece in the machine; use a screwdriver to tighten the screw on the side of the machine.

 

 


(Click on image for movie demonstration)

Step 2: Installing Grommets
There are two pieces to a grommet. The top piece is the eyelet and the other piece is the washer. The washer will lay in the bottom die with the rounded side down. The eyelet piece that looks like a "top hat" should be pushed up onto the top die so that the large flat part is on the top and fits snug into the die. The smaller thinner part that actually pierces the material should be pointing down.



(Click on image for movie demonstration)

Step 3: Seating Grommets
Once you have the grommet into the machine simply insert the material you would like to grommet and push down on the handle slow, firm and steadily. The grommet will pierce through the material and the material that was in the hole will fall out.

 

Page 2: CSHAP-1 Hand Pliers Tutorial

mg_botgraf.gif (1658 bytes)


Home / Sitemap / ClipsShop BGTEP-XL Grommet Machine / ClipsShop CSTEP-2 Grommet Machine / ClipsShop CSTEP-1 Grommet Machine / ClipsShop CSTON-1 Stroking Grommet Machine / ClipsShop CSHAP-1 Grommet Pliers / Stimpson 405 Grommet Machine / Stimpson 479 Grommet Machine / PMS060 Pneumatic Plastic Grommet Machine / Fasnap YM450 Grommet Machine / Micron TEP-1 Grommet Machine

Clearance / Grommet Machine Dies / Grommets / Fasnap Grommets / Stimpson Grommets / ClipsShop Grommets / Micron Grommets / Plastic Grommets

Grommeting Tutorial / International Shipping / Catalog / Testimonials / Cart / FAQ / Policies / Contact Us

Sign Letters

© 2001-2013 BuyGrommets.com